1. Print a deposit slip with real or dummy data (either a sample included with Qslip, or a deposit of your own) to standard 8.5" x 11" paper.
2. Place a blank pre-printed deposit slip over the standard sheet.
3. Hold up to the light, align the date field, and note positions of other items.
4. Make adjustments to field positions values as necessary and retest.

Test the overall alignment

If printer feeds deposit slips in center (most laser printers):

1. Fold the standard sheet vertically in half.
2. Fold the blank pre-printed deposit slip in half vertically.
3. Place the slip over the standard sheet, aligning the folds and the top edges.
4. Hold up to the light and note positions.
5. Make adjustments to the Vertical and Horizontal alignment values as necessary and retest.

If printer feeds deposit slips at one side (many inkjet printers):

1. Depending upon which side the printer feeds, either set the Horizontal Adjustment value to near zero, or a value that will shift the slip image to the other side of the page.
2. Make adjustments to the Vertical and Horizontal alignment values as necessary and retest.

Print a test to a blank pre-printed deposit slip

1. Check alignment and adjust as necessary.